LoveBotz 19X Mini Milker Male Masturbator

The LoveBotz 19X Mini Handheld Milker is a male masturbator with suction, vibration and a ball strap. Its soft TPE sleeve has a 5-inch inner depth, with ribs and raised bumps inside.

Use the handheld controller to choose from 3 suction speeds and 3 intensity levels. The included bullet fits into a pocket on the sleeve. It adds 3 vibration speeds and 7 patterns, so you can change the pace and feel.

The ball strap helps hold the sleeve in place during use. A 44-inch hose connects it to the pump, with a liquid chamber to collect fluids. Both the controller and bullet recharge by USB using the supplied cable.

How to Use

Charge both units. Follow the instructions to connect the hose, pair the bullet with the controller and fit it into its pocket.
Add water-based lube to the sleeve. Fit the ball strap comfortably behind the scrotum without forcing or overstretching it.
Start with the lowest settings. Stop if you feel pain, pinching or numbness.
Switch off and release the suction before removing the sleeve.

How to Clean

Switch off both units. Remove the bullet and disconnect the sleeve, hose and liquid chamber.
Wash the detached sleeve, hose and chamber with warm water and mild soap. Rinse well.
Wipe the controller and bullet with a damp cloth. Do not submerge either unit.
Let all parts dry fully before you reassemble, charge or store them.

Specifications

Measurements

Inner depth: 5 inches / 12 cm
Inner diameter, unstretched: 0.75 inches / 1.9 cm
Sleeve overall length: 7.8 inches / 19.8 cm
Sleeve width: 2.8 inches / 7.1 cm
Controller length × width: 6 × 2.6 inches / 15.2 × 6.6 cm
Hose length: 44 inches / 111.8 cm
Bullet length × diameter: 2.4 × 0.75 inches / 6.1 × 1.9 cm
Product weight: 570 g

Materials and Design

Sleeve: Soft, stretchy TPE with a ribbed inner tunnel
Strap: Attached ball strap
Other materials: ABS plastic and silicone
Colours: Black, blue and clear
Recommended lubricant: Water-based

What’s Included

One handheld suction pump and controller
One clear TPE sleeve with attached ball strap
One removable bullet vibrator
One suction hose with liquid collection chamber
One USB charging cable

FAQs

Can I use suction and vibration together?

Yes. The pump provides suction while the bullet adds vibration. Pair the bullet with the controller, then use the controls to change the settings.

Can I use the LoveBotz 19X hands-free?

The ball strap helps hold the sleeve in place while the suction and vibration run. You still use the handheld controller to adjust the settings.

Is the LoveBotz 19X waterproof?

Do not submerge the controller or bullet vibrator. Disconnect the washable sleeve, hose and chamber before cleaning, and wipe the powered parts with a damp cloth.